This is an application for using the internal infrared blaster of many modern smartphones - with the long-term aim to support most devices with infrared-remote control and their functions as possible.
The format of the remotes has been designed in a very flexible way and the full layout with codes can be edited via the app and an import / export method.
Supported devices:
- Any smartphone or tablet using Android 4.4 or higher with an infrared blaster / emitter (only if the API was correctly implemented by the manufacturer, Some SONY devices are NOT supported because they can not send RAW codes!)
- Other: Xiaomi Mi4, Cubot X12, Huawei Honor 8
- LG G3, G4, G5 and newer (Some older LGs are not supported because the LG API does not support raw codes on them)
- Samsung devices with Infrared and Stock-ROM will work on Android below Kitkat too.
- HTC devices below 4.4 are supported as well but may cause problems (Contact me if you need assistance)
- Support for Medion Lifetab S7852 and S10334 and other Lenovo devices with infrared.
- If your device has infrared and does not work, please contact with additional info so i can check if support can be added.
If the device you want to control is not available send me an E-Mail request and i will try to add it into the database when i have time. Also feel free to search for working discrete Codes yourself and send them in (LIRC, Pronto Hex etc) to make my research easier and build the database faster.
Notable features:
- Import LIRC (*.cf, *.conf) and irplus (*.irplus, *.xml) files.
- Macro mode, Buttons can send multiple IR commands in a row with one press
- Layout and codes of remote control can be customized via XML files
- Option to use Volume Up / Volume Down Hardware buttons to send commands
- Option to visualize sent IR code as On/Off graph for easy code check
- 3 type of Widgets (Single, 6- and 9-Button)
Please note: If you rate this application, please consider its under active development. If you have problems or suggestions please contact me for helping me to fix them! ;-)
Thanks!
~~~~~~
هذا هو تطبيق لاستخدام مكبر الأشعة تحت الحمراء الداخلي للعديد من الهواتف الذكية الحديثة - بهدف طويلة الأجل لدعم معظم الأجهزة مع مراقبة الأشعة تحت الحمراء البعيدة، ووظائفها وقت ممكن.
وقد تم تصميم شكل أجهزة التحكم عن بعد بطريقة مرنة جدا والتصميم الكامل مع رموز يمكن أن تعدل عن طريق التطبيق وطريقة الاستيراد / التصدير.
الأجهزة المدعومة:
- (! إلا إذا تم تنفيذ API بشكل صحيح من قبل الشركة المصنعة، بعض أجهزة SONY غير معتمدة لأنها لا يمكن إرسال رموز RAW) أي الهاتف الذكي أو الكمبيوتر اللوحي باستخدام الروبوت 4.4 أو أعلى مع مكبر الأشعة تحت الحمراء / باعث
- غيرها: XIAOMI MI4، Cubot X12، هواوي الشرف 8
- LG G3، G4، G5 وأحدث (لا يتم اعتماد بعض خطابات الضمان من كبار السن لأن API LG لا يدعم رموز الخام عليهم)
- أجهزة سامسونج مع الأشعة تحت الحمراء والمالية-ROM ستعمل على الروبوت أدناه كات جدا.
- يتم دعم الأجهزة HTC أدناه 4.4 كذلك، ولكن قد يسبب مشاكل (اتصل بي اذا كنت بحاجة إلى مساعدة)
- تقديم الدعم لميديون Lifetab S7852 وS10334 وغيرها من الأجهزة لينوفو مع الأشعة تحت الحمراء.
- إذا كان جهازك يحتوي على الأشعة تحت الحمراء ولا تعمل، يرجى الاتصال مع معلومات إضافية حتى أتمكن من معرفة ما اذا كان يمكن إضافة دعم.
إذا كان الجهاز الذي تريد التحكم غير متوفر ترسل لي طلب البريد الإلكتروني وسأحاول أن إضافته إلى قاعدة البيانات عندما يكون لدي وقت. كما لا تتردد في البحث عن العمل رموز منفصلة نفسك وإرسالها في (LIRC، برونتو عرافة الخ) لجعل بحثي أسهل وبناء قاعدة البيانات بشكل أسرع.
السمات البارزة:
- استيراد LIRC (* .cf، * .conf) و (*، * .irplus. XML) الملفات irplus.
- وضع الماكرو، أزرار يمكن أن ترسل عدة أوامر الأشعة تحت الحمراء على التوالي بضغطة واحدة
- تخطيط ورموز التحكم عن بعد يمكن تخصيصها من خلال ملفات XML
- الخيار لاستخدام رفع مستوى الصوت / خفض مستوى الصوت أزرار الأجهزة لإرسال الأوامر
- الخيار لتصور إرسال رمز الأشعة تحت الحمراء كما تشغيل / إيقاف الرسم البياني لفحص كود السهل
- 3 نوع من الحاجيات (واحدة، 6- و9-زر)
يرجى ملاحظة: إذا كنت تقيم هذا التطبيق، يرجى النظر في إطار التنمية النشطة. إذا كان لديك مشاكل أو اقتراحات يرجى الاتصال بي لمساعدتي لاصلاحها! ؛-)
شكر!
~~~~~